SainSmart Mega2560 R3 ATmega2560-16AU + ATMEGA16U2 + Câble USB pour Arduino UNO Robot Mega2560 R3 Duemilanove 2013 - B00CF2REXC

SainSmart Mega2560 R3 ATmega2560-16AU + ATMEGA16U2 + Câble USB pour Arduino UNO Robot Mega2560 R3 Duemilanove 2013 - B00CF2REXC
SainSmart Mega2560 R3 ATmega2560-16AU + ATMEGA16U2 + Câble USB pour Arduino UNO Robot Mega2560 R3 Duemilanove 2013 - B00CF2REXC SainSmart Mega2560 R3 ATmega2560-16AU + ATMEGA16U2 + Câble USB pour Arduino UNO Robot Mega2560 R3 Duemilanove 2013 - B00CF2REXC SainSmart Mega2560 R3 ATmega2560-16AU + ATMEGA16U2 + Câble USB pour Arduino UNO Robot Mega2560 R3 Duemilanove 2013 - B00CF2REXC SainSmart Mega2560 R3 ATmega2560-16AU + ATMEGA16U2 + Câble USB pour Arduino UNO Robot Mega2560 R3 Duemilanove 2013 - B00CF2REXC SainSmart Mega2560 R3 ATmega2560-16AU + ATMEGA16U2 + Câble USB pour Arduino UNO Robot Mega2560 R3 Duemilanove 2013 - B00CF2REXC SainSmart Mega2560 R3 ATmega2560-16AU + ATMEGA16U2 + Câble USB pour Arduino UNO Robot Mega2560 R3 Duemilanove 2013 - B00CF2REXC
Modèle : B00CF2REXC
Disponibilité : En Stock
Prix : 352,86€ 14,54€
Qté :  
   - OU -   

  • Utilisez une ATMega16U2 la place de la puce ATmega8U2.

  • Vitesse de transfert et plus de mémoire.

  • Pas besoin de drivers pour Linux ou Mac.

  • This is the new SainSmart MEGA2560 R3. In addition to all the features of the previous board, the MEGA now uses an ATMega16U2 instead of the ATMega8U2 chip. This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.

    The SainSmart MEGA2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The MEGA2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.


    New features
    * 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
    * Stronger RESET circuit.
    * Atmega 16U2 replace the 8U2.

    Specifications
    * Microcontroller: ATmega2560
    * Operating Voltage: 5V
    * Input Voltage (recommended): 7-12V
    * Input Voltage (limits): 6-20V
    * Digital I/O Pins: 54 (of which 15 provide PWM output)
    * Analog Input Pins: 16.00
    * DC Current per I/O Pin: 40 mA
    * DC Current for 3.3V Pin: 50 mA
    * Flash Memory: 256 KB of which 8 KB used by bootloader
    * SRAM: 8 KB
    * EEPROM: 4 KB
    * Clock Speed: 16?MHz

    Package List
    1 x Sainsmart Mega2560 R3
    1 x USB Cable"

    Poids de l'article113 g
    Dimensions du produit (L x l x h)18,5 x 14,2 x 5,6 cm
    Référence fabricant101-52-102
    Batterie(s) / Pile(s) requise(s) Non
    Batterie(s) / Pile(s) incluse(s) Non
    Matière principaleEmballage en plastique
      

    SainSmart Mega2560 R3 ATmega2560-16AU + ATMEGA16U2 + Câble USB pour Arduino UNO Robot Mega2560 R3 Duemilanove 2013 - B00CF2REXC